Описание

  • Magnetic guard locking for process protection
  • Guard locking solenoid with locking force of 650 N
  • Function expansion for safety switch CES-C04 / CES-C07
  • Flexibility through a large selection of safety switches
  • Maximum safety level PL e / category 4 for detection of the door position
  • Transponder coding prevents high level of protection against tampering
  • Simple connection of the solenoid using M12 plug connector, 5-pin
  • Yellow LED to indicate voltage at the solenoid
  • Nickel-plated solenoid surface with high corrosion resistance
  • Integrated permanent magnet, 30 N adhesive force
Approach direction Horizontal Guard locking type
CEM?M2Guard locking actuated by energy ON and released by energy OFF.
Combinations
Guard locking solenoid Safety switch Actuator Use
CES-C04 for CES-C04
CES-C07 for CES-C07
Material
Solenoid Steel, nickel-plated
Housing material Aluminum
Weight
Net 0,45 kg
Ambient temperature -25 ... 50 °C
Degree of protection IP 65, IP 67
Mechanical life
In case of use as door stop, and 1 Joule impact energy 1 x 106
Installation orientation Any
Connection M12, 5-pin
Guard locking principle Open-circuit current principle
Locking force F
(Not monitored, in axial direction) at UCM?24V 650 N
Adhesive force
by permanent magnet 30 N 0+15
Electrical connection ratings
Operating voltage DC
UCM 24 V DC -15% ... +10%
Current consumption 100 mA
Power consumption 2,4 W
Solenoid duty cycle 100 %
Work area
Assured switch-off distance Sar
Assured switch-off distance Sar max.17 mm
max.40 mm
Assured operating distance Sao
With center offset m=0 min.5 mm
min.2 mm
Center offset
Solenoid -2,5 ... +2,5 mm
Transponder detection (typical value at room temperature) -10 ... +10 mm
''